Month: November 2022

If not taken care of, a water-damaged phone can create a lot of mess with the internal electrical components. It can also make your phone irreparable, and you could lose all the data. 

So, did you drop your phone accidentally in the toilet? Or did your pet dog slobber it or throw it into a water bucket? Immediately follow these steps to save your mobile.

Solving a Water Damaged Cell Phone

Note: Do not touch your mobile phone if it’s wet and connected to a charger. 

Quickly remove your phone from the water and take out its battery. It is the first thing you can do to save your phone. Most devices come with a white indicator that turns pink or red, confirming that the device has been water damaged.

So, dry the moisture by putting your phone in a bowl or bag of rice for at least 12 hours. You can also dry the phone using a vacuum cleaner. But make sure to keep the vacuum at a distance. You can also apply rubbing alcohol to your device. It may work if the phone isn’t exposed to water yet. 

Also, try to follow these Do’s and Don’ts:

Do’s

• Remove any external hardware or chip plugged into your phones, such as memory card and sim card
• Use an absorbent towel and use gentle hands to dry the area

Don’ts

• Avoid pushing buttons to stop the water from going into the circuit
• Never use a hairdryer, or else it could force the water from reaching the internal components
• Don’t shake your phone unnecessarily – keep it still to save the water from spreading to other parts of the device
• Don’t turn on your mobile – wait for at least 24 hours before making an attempt 

Repairing Water Damage Cell Phones

If none of the suggestions works for you, let Mr Fix deal with the problem. Our expert technicians always give their best to save your water-damaged phone. If the damage has been done, we can retrieve your critical information from your phone and transfer it to any other device. 

If you have been a Samsung mobile user for the past 3 months or more, you might be experiencing some issues. These problems have been popping up on all Samsung devices. So, in this blog, you will learn about fixing some of the 5 most common issues of Samsung mobiles. All the solutions are pretty straightforward. So let’s review them one by one. 

1. Excessive Battery Draining in Samsung Mobile

Do you think you’re losing battery fast? There could be many other explanations behind this fault, and it won’t be right to blame the battery for its bad health. 

Solution: You can get a good battery life by following these steps:

• Turn off all connectivity options, including Bluetooth, Wi-Fi, GPS, and NFC
• Use the phone optimizer to clean the mobile applications
• Turn on your phone’s “Power Saving Mode”
• Lower your screen’s brightness
• Don’t turn on the “Always On Display” option
• Avoid using live wallpapers 

2. Unresponsive and Frozen Screen in Samsung Mobile

This problem occurs when your phone gets stuck during usage, and the screen becomes unresponsive despite touching and tapping the panel. It could be a problem related to your phone’s cache. 

Solution: If the screen gets stuck temporarily, you can eliminate this by simply locking and unlocking your device using the power button. If the power button also becomes unresponsive, restart your mobile phone by pressing the power button for about 10 seconds. If the second solution works for you and the problem arises quite a lot, it is wise to factory reset your phone. 

3. Overheating Problem in Samsung Mobile

A weak or old battery is the most common reason for overheating your Samsung mobile. Nevertheless, the surrounding environment and temperature are two important factors responsible for the heating level. Another reason could be charging and using your phone at the same time. 

Solution: It is suggested to buy a new battery and replace it with the old one to solve this problem. If that’s not what you’re looking for right now! Try these steps:

• Use your phone at normal temperature
• Save your phone from direct sunlight
• Don’t use your phone while you’re charging the battery
• Always turn off your phone’s mobile data when not in use

4. Issues Connecting to Wi-Fi in Samsung Phone

Don’t panic if your phone isn’t connecting to Wi-Fi. It is more of a signal problem and not directly related to your mobile phone.

Solution: Restart your mobile and then connect it to your Wi-Fi. If the problem still exists, turn on your phone’s Airplane Mode for 15 seconds. Doing so will resolve the connectivity issue. 

5. Unable to Download Applications from Google Play Store on Samsung Mobile

Many Samsung smartphone users complain about not being able to download mobile applications from the Google Play Store. To fix this issue, you need to adjust your Google Play settings. 

Solution: Clear the cache of your Google Play Store through:

• Go to phone settings
• Select Apps and choose Google Play Store
• Open Play Store’s settings  and select “Clean Cache”
• Restart your phone and download apps

Clear your Google Play Store history if the above fix doesn’t work. To do that:

• Launch Play Store
• Go to settings
• Select “Clean History”

If you want to know how to force restart an iPhone 6, you have landed on the right tutorial!

Force restarting an iPhone 6 is a simple job and doesn’t require any special knowledge. But you should know when to do it. For example, if your iPhone 6 is irresponsive or frozen, you should consider fixing it through a force restart. 

Here’s the step-by-step process to successfully force restart your iPhone 6:

Step 1

Press and hold your iPhone 6 Home button.

Step 2

While you stay continuous with pressing the Home button, press and hold the Wake/Sleep button.

Step 3

Keep the grip constant on both buttons for at least 10 seconds until you see the Apple logo appearing on the screen.

That’s all!

Did you accidentally spill water on your MacBook? Don’t be surprised because you’re not the only one. Water-damaged MacBook is an extremely common situation than you think. And the good news is that it is fixable. 

This article will teach you how to protect and fix a water-damaged MacBook. However, if the damage is severe, you might need to contact an expert and trustworthy repair shop.

Ways to Protect Your MacBook from Water Damage

The best cure is prevention. Therefore, it is suggested to prevent this accident, so there’s no need to look for fixes. You can do many things to safeguard your device from water spills. For example:

1. Lid Your Drink

The simplest precaution is to cover your water bottle or glass with a lid. So even if it tumbles, the water won’t spill out. 

2. Keep Your MacBook Away from Water

Another great solution is to keep any water source away from your MacBook. Remember, water takes a few seconds to overcome a flat surface. So if you won’t keep a drink near the device, there will be time to save your MacBook from water damage, as you can pick it up instantly. 

Contrarily, keeping your MacBook over a pile of a few magazines or books will keep the device above the surface. So, if the water spills, it won’t reach your laptop. 

3. Use Protective Equipment

Many useful protective gears are available to save your MacBook from water damage. Things like silicone lids for your ports, keyboard covers, laptop sleeves, and screen guards can cease the water from spreading on the laptop in case you spill it over your device. Why so?

It is because all this protective equipment closes every possible entry point for water. And as a result, it protects your expensive MacBook from water damage repair. 

Got A Water Damaged MacBook? Here’s What You Should Do?

There are three ways to fix a water-damaged MacBook, such as:

1. Unplug All the Connections

First, unplug all your MacBook’s connections, including the power adapter (if connected), scanner, printer, and mouse (all peripherals). 

Note: If you own an older MacBook model like MacBook Pro 15” (2009), you should also remove the battery.

However, keep in mind that when unplugging connections, peripherals, or batteries, you should wear protective gear, such as rubber footwear and gloves. 

2. Shutdown Your MacBook for At Least 2 Days

Another thing you should consider doing without a second thought is to shut down your MacBook immediately. Leave the laptop turned off for at least 2 days (48 hours) without turning on the device. 

Suppose the device isn’t shutting down; press and hold your MacBook’s power button for about five seconds until it’s turned off. If the laptop is still running but unresponsive, the water has already damaged the keyboard. Therefore, you need to try another method. 

Take tissues or paper to soak water from the screen, keyboard, and touchpad surface. Now, close the lid to activate your laptop’s hardware-level sleep sensor. Doing so will send a command from your MacBook’s logic board to disengage all the circuits, including the CPU and SSD drive. 

3. Keep Your MacBook in a Tent Position (Only Non-Retina Models)

If the device has shut down, keep it in a tent-like position on a dry surface to let the water drain out of the system. But remember that this method only works on non-retina screen MacBook models, such as Pre-2013 MacBook Pro and Pre-2018 MacBook Air. 

Things to Avoid When Dealing With Water Damaged MacBook

• Don’t use a hairdryer to dry your MacBook
• Don’t share a wet MacBook
• Do not turn on your device

What to do if all things fail?

If none of the above methods works, you should contact a trustable repair shop to help fix the issue as soon as possible at affordable prices.

Since Apple Watch is part of Apple’s ecosystem, there aren’t any complications when pairing with iPhone. You must scan the QR code through your iPhone and make the connection. And whenever the watch is near the iPhone, it automatically gets synced. 

But sometimes, pairing Apple Watch with iPhone becomes a huge challenge. However, the good news is that you can fix this issue in no time. So if you want to know to do it, keep reading this article.

1. Check Your Apple Watch’s Settings

Some Apple Watch settings prevent it from pairing with iPhone. Therefore, you need to check and correct the following settings.

Airplane Mode

Disable Airplane Mode on both iPhone and Apple Watch for seamless pairing. If any device has left with an enabled Airplane Mode, it will disconnect all the frequencies, including NFC, Wireless, and Bluetooth. As a consequence, it will be impossible to pair the Apple Watch. 

Bluetooth

The Bluetooth of your iPhone must be enabled so it can make a connection with the Apple Watch. Therefore, go to the Access Control Centre and make sure the Bluetooth button is turned on. 

Note: You can check whether or not your Apple Watch is connected by accessing the control center. If the iPhone icon is turned “green,” it means the watch is connected. If the icon appears “red”, no iPhone is connected. 

2. Force Restart Your Apple Watch and iPhone

If the above ways don’t work, try to force restart your devices.

Force Restarting the Apple Watch

Press and hold the digital crown and side button simultaneously until the Apple logo shows on the screen. Ensure the watch is disconnected from the charger; otherwise, it won’t force restart. 

Force Restarting iPhone 8 or Latest Models

Press your iPhone’s volume up button and immediately withdraw your finger/thumb. Then, press your phone’s volume down button. And immediately remove your finger from it. Now, press your iPhone’s side button until you see the Apple logo displaying on your phone’s screen. 

Force Restarting iPhone 7 and 7 Plus

Press and hold the side and your iPhone’s volume down button simultaneously until the Apple logo is seen on the screen. 

Force Restarting iPhone 6s or Previous Models

Hold and press the power and home button together and release them when you find the Apple logo on the screen.

3. Reset the Network Settings on Your iPhone

If the Apple Watch is still unpaired with your iPhone, you might need to reset your phone’s network settings. To do that:

Go to the “Settings” > “General” > “Reset” > “Reset Network Settings.”

Next, input your password and hit the “Reset Network Settings” option. 

Note: After the network reset, you must reconnect with VPN and Wi-Fi and pair the phone with all Bluetooth devices. 

Bonus Tips

• Make sure your Apple Watch and iPhone are both updated, or else you will find difficulty pairing them together
• If nothing works, you will need to erase the Apple Watch and pair it again with your iPhone