A Complete Guide to Replacing the iPhone 13 Screen

October 2, 2025

If your iPhone 13 screen is cracked or broken, it might be hard to operate your phone and get things done. If your screen is broken, unresponsive, or showing strange images, a new one might get your iPhone back to its original condition. Mr Fix has put together this extensive guide to help you replace your iPhone 13 screen. It includes step-by-step directions for how to do it yourself. We also want to point out the benefits of hiring Mr Fix if you want professional help or encounter issues when trying to fix something.

Things You Need

It’s essential to get all the equipment and materials you need before you start replacing the screen. Having everything you need will make repairs go more smoothly and quickly.

You will need the following things:

Use a P2 pentalobe screwdriver to take out the two screws at the bottom of the iPhone.

Phillips #000 screwdriver: For screws inside that hold different parts together.

Tri-point screwdriver (Y000): Needed for some internal screws, especially the ones that hold down cable covers.

Plastic pry tools are necessary for safely disassembling parts without breaking them.

Suction Cup Tool: This tool helps make the first space between the screen and the frame of the device.

A spudger is a valuable tool for pulling apart connectors and prying apart fragile parts.

Tweezers help work with little screws and fragile wires.

Replacement iPhone 13 Screen: Make sure you choose a high-quality screen that works with your iPhone 13 model.

SIM Card Ejector Tool: This tool lets you take out the SIM card tray before you open the device.

Optional: ESD-safe mat or gloves. These protect against electrostatic discharge, which can hurt sensitive electronic parts.

Adhesive strips for attaching the screen: You need new adhesive to make sure the new screen is securely sealed to the frame.

You can usually buy these tools as a complete set from internet stores that sell parts for fixing electronics if you don’t already have them.

How to Change the iPhone 13 Screen in Steps

To replace the screen on an iPhone 13, you need to be patient and careful. To make sure the repair goes well, follow these procedures carefully.

Step 1: Turn off your iPhone 13

Before you make any repairs, you must turn off your iPhone 13 completely. This stops any short circuits or harm to the device’s internal parts from happening by mistake during the repair. Unplug any cords or anything else that might be connected to your iPhone.

Step 2: Take out the Pentalobe screws.

Find the two pentalobe screws on either side of the charging port at the bottom of your iPhone 13. Carefully take these screws out with the Pentalobe screwdriver (P2). You should put these screws in a small container or on a magnetic pad to keep them from getting lost. They are pretty little and can easily get lost.

Step 3: Make a Space How to Use the Suction Cup

Put the suction cup tool on the bottom of the screen, right above where the home button would be if your iPhone 13 had one (it doesn’t, but this is the general region for leverage). Put even, firm pressure on the suction cup and slowly lift it. The goal of this step is to create a small gap between the screen assembly and the device frame. You might hear a slight popping sound, which is typical when the seal starts to come apart.

Step 4: Open the iPhone 13 with a tool

Put a plastic pry tool into the space once there is a small gap. Gently move the pry tool along the borders of the iPhone to separate the screen from the frame. Be very careful at this point so you don’t break any of the internal parts, especially the fragile cables on the right side of the device.

Step 5: Take the battery out.

When you carefully open the screen, you will see several connectors. The first and most important thing to do before moving on is to detach the battery. Find the battery connector, which is usually held in place by a little metal bracket. Use a spudger to lift the battery cable and detach it carefully and gently. This procedure shuts off electricity to the gadget, so you can safely work on other parts.

Step 6: Take off the broken screen.

To completely remove the shattered screen, you need to unplug the other wires that connect it to the iPhone’s motherboard. Usually, these are the display cable, the touch digitizer cable, and the cable for the front sensor assembly. Small metal shields held in place by Phillips or Tri-point screws commonly cover these connectors.

Step 7: Put in the new screen

Before putting in the new screen, be sure you carefully move over any parts from the previous screen that are not included with the new one. The earpiece speaker, front camera, and ambient light sensor component are usually part of this. Small screws hold these parts in place, and you need to be careful while using tweezers and a Phillips or Tri-point screwdriver to work with them.

Carefully place the new replacement screen after it has been moved. Connect the display, touch digitizer, and front sensor assembly to the correct ports on the motherboard. Use your spudger to gently press down on each connector until you hear or feel a gentle click. This means that the connection is secure. Put back any metal brackets and screws that hold these cables in place. Gently push down on the replacement screen to make sure it fits snugly in the frame.

Step 8: Plug the battery back in.

It’s time to reconnect the battery now that all the screen cables are securely in place. Line up the battery connector with the port on the motherboard carefully, and then press down hard with your spudger until it clicks into place. Put back any battery connector brackets you took off before.

Step 9: Put the iPhone 13 back together

Carefully line up the replacement screen with the frame of the device. First, line up the top edge, and then lightly push the sides and bottom. To get the screen fully into the frame, you may need to put even, moderate pressure around the edges. After the screen is flush, put the two Pentalobe screws back in at the bottom edge of the iPhone that you took out in Step 2. These screws will hold the screen in place on the frame.

Step 10: Turn on the new screen and test it.

Now that you’ve put the new screen on and reassembled the device, it’s time to turn on your iPhone 13. Press and hold the power button until you see the Apple logo. Once the iPhone starts up, make sure your replacement screen works well.

Check the following:

Check for any dead pixels, discolouration, or flickering to assess the display’s quality.

Touch sensitivity: Make sure that all parts of the screen respond correctly to touch by swiping across it, opening apps, and typing on the keyboard.

3D Touch and Haptic Touch: If your device has these features, make sure they operate by testing them.

Check that you can change the brightness and that True Tone (if your device supports it) is working.

Check the front camera, the proximity sensor (which turns off the screen when you hold the phone to your ear), and the ambient light sensor (which automatically changes the brightness of the screen).

If you run into any problems during testing, please see the troubleshooting section below.

Common Problems and How to Fix Them

Even if you do everything right, you can still have problems after replacing the screen on your iPhone 13. Here are some frequent difficulties and how to fix them:

Problem 1: The screen doesn’t respond after being replaced.

If your replacement screen stays black or doesn’t respond after you put it back together, make sure the battery is connected and charged. After that, open the device again and carefully ensure that all of the screen connectors are firmly attached to the motherboard. Sometimes, a connector may appear connected, but it’s not fully inserted. If the problem keeps happening, the new screen might be broken, or the connectors on the screen or the motherboard might be broken.

Problem 2: The screen flickers or the display doesn’t work.

A loose or broken connection can cause the display to flicker or look weird. Open the iPhone again and carefully check the digitizer and display wires for any evidence of damage or a bad connection. Make sure they are firmly connected again. If the problem keeps happening, it could be because the replacement screen is broken or, less often, the motherboard’s display circuitry is damaged.

Problem 3: Problems with aligning the screen

You can have an alignment problem if the new screen doesn’t fit perfectly in the iPhone’s frame or if there are visible gaps. Make sure that no internal cords are pinching or blocking the screen from sitting properly. Open the device again, carefully move the screen back into place, and press down evenly on all edges before putting the bottom screws back in. Sometimes, the new adhesive strips might not be properly aligned, which would prevent a good seal.

Problem 4: The touchscreen doesn’t work.

If your touchscreen isn’t working, even if the display is clear, the digitizer connection is likely broken. Make sure that the digitizer cable is fully and securely attached again. If the problem doesn’t go away, try forcibly restarting your iPhone by pressing and fast-releasing the volume up button, then the volume down button, and finally the side button until the Apple logo displays. If the problem still happens, the replacement screen’s digitizer might be broken, or there might be software problems. Look for any iOS updates that are available.

If you keep having problems or don’t feel comfortable doing more troubleshooting, it’s always better to get help from an expert.

Why You Should Choose Mr Fix to Replace Your iPhone Screen

Replacing a screen yourself can save you money, but it also comes with certain risks. Mr Fix is the best solution for people who want peace of mind, experienced help, and guaranteed outcomes.

Here are some reasons to choose us to replace your iPhone screen:

Our staff of expert technicians has extensive experience fixing iPhones and is fully trained and qualified. We make sure that every repair is done with care and accuracy to minimize the risk of further damage.

Quality Parts: We only utilize replacement screens and parts that are high-quality, reliable, and meet strict performance standards. This dedication to quality makes sure that your repaired iPhone will last a long time and work well.

Quick and helpful service: We know how important your iPhone is to you every day. Most of the time, Mr Fix can replace your screen quickly, usually in less than an hour, so you can get back to your everyday life without having to wait long.

We guarantee the quality of our work. Mr Fix offers a full guarantee on all screen replacements, covering both parts and labor. This makes you feel better and more confident.

Affordable Prices: Our repair services are competitively priced and clear, so you can be sure you’re getting tremendous value without sacrificing quality or expertise.

For professional screen replacement, get in touch with Mr Fix.

If you don’t want to try to fix something yourself, encounter problems, or enjoy the peace of mind that comes with hiring a professional, Mr Fix is here to help. Our skilled specialists are ready to replace the screen on your iPhone 13 quickly, reliably, and with excellent quality.

FAQs

Q: Can I change the screen on my iPhone 13?

A: Yes, you can change the screen on your iPhone 13 yourself if you have the necessary tools, pay close attention to the instructions, and are somewhat comfortable with technology. But it needs to be done carefully, and it might be dangerous if you don’t know how to fix electronics. Mr Fix will help you with any problems you have or if you’re not sure about the process.

Q: How long does it take to replace the screen on an iPhone 13?

A: A skilled tech at Mr Fix can usually replace an iPhone 13 screen in 20 to 30 minutes so that you can get your phone back promptly. If you’re repairing yourself, the time it takes can vary significantly depending on how experienced you are and how well the operation goes.

Q: What if I break the parts inside while I’m fixing it?

A: To avoid breaking internal parts while doing a DIY repair, you need to be very careful and work carefully. If something goes wrong, like a broken connector or a shredded cable, it’s best to stop right away and call Mr Fix for help. Our professionals can look at the damage and suggest ways to fix your device.

Q: Do you give a warranty on screen replacements?

A: Yes, of course. Mr Fix offers a full guarantee on all screen replacements, which covers both the parts and the work that goes into the repair. This warranty gives our customers peace of mind and confidence in the quality and longevity of our repairs.

Conclusion

If you have the right tools and a step-by-step tutorial, changing the screen on your iPhone 13 is relatively easy. This post has shown you how to fix your device yourself, from turning it off to testing your new screen.

Mr Fix is still the best choice for anyone who wants skilled precision, high-quality parts, fast service, and a warranty that makes them feel good. We are committed to offering dependable and quick repair services to get your iPhone 13 back to excellent working order. If you have any problems when trying to do it yourself or if you want a professional to handle your screen replacement needs, don’t hesitate to contact us.