How to Pair AirPods Pro

December 30, 2025

AirPods Pro works well with your Apple devices, including your iPhone, iPad, or Mac, so you can have a seamless audio experience. Your device usually sees both AirPods as one pair during the procedure. Advanced internal technology manages this smooth connection, letting the two earbuds talk to each other, your device, and the charging case.

The system needs to see the new AirPod Pro as part of the original set when you add it. This is where users often have problems. The main problem is getting the charging case and your Apple device to agree that the new AirPod Pro belongs to them and that both the original and the replacement AirPod Pro should work together as a stereo pair. If you don’t follow the right pairing order, you could only be able to connect one AirPod Pro or the system might have trouble finding both.

How to Pair a New AirPod Pro: A Step-by-Step Guide

It may seem hard to pair a new AirPod Pro, but you can usually fix the problem yourself by following these exact instructions.

Step 1: Reset the case for your AirPods Pro

The first important thing to do is to reset the charging case for your AirPods Pro. This step removes any old pairing information, which lets the system find new or replacement AirPods.

Open the case for the AirPods Pro. Make sure that at least one AirPod, either your original or a replacement, is inside.

Find the setup button: There is a small, round setup button on the rear of the charging case.

Press and hold: For around 15 seconds, press and hold this setup button. Look at the status light on the front of the casing at this time. It will usually flash amber a few times before turning white. The change to a white flashing light means that the case has been reset and is ready to be paired with a new device.

Step 2: Put in the new AirPod Pro.

It’s time to put in the new AirPod Pro once the case has been reset.

Put both AirPods inside: Make sure that both the new AirPod Pro and the old AirPod (if you still have one) are safely stored in the charging case.

Shut the lid: Make sure the lid of the charging case is well shut.

Be patient: Give the AirPods at least 30 seconds to talk to the case and register themselves as a pair. This little wait is necessary for the internal parts to get in sync.

Step 3: Start pairing with your iPhone or iPad

You can now connect your AirPods Pro to your Apple device because they are in their case and the case has been reset.

Open the lid of the case: The charging case’s lid should be open with both AirPods Pro inside.

Put it next to your device: Put the open case next to your iPhone or iPad. Your device should be able to find the AirPods Pro and show a pairing animation on the screen.

Do what the screen says: To finish pairing, tap “Connect” or follow any further instructions that show up on your screen.

If you get a message saying “Forget This Device,” it could mean that your device is still holding on to previous pairing information. If you have problems, go to Settings > Bluetooth, hit the “i” icon next to your AirPods Pro, and then choose “Forget This Device.” Then, confirm your option and do Step 3 over again. This will offer your device a new start for the connection.

Step 4: Fixing problems with the connection

You can still have problems even after following the steps.

Check the battery level: If one AirPod Pro isn’t recognized, make sure both AirPods have enough battery power. Put them in the case for a time to allow them to charge all the way.

Do another factory reset: If pairing still doesn’t work, go back to Step 1 and do the factory reset again. Being persistent can frequently pay dividends.

Look for upgrades to the firmware: Make sure your iPhone or iPad has the most recent version of iOS or iPadOS. Your linked Apple device usually sends you AirPods Pro software updates. If your system is out of date, it can sometimes cause problems with compatibility.

Common Problems and How to Fix Them

Even if you do everything right, some problems can still happen. Here are some frequent difficulties and easy fixes:

If one of your AirPods Pro isn’t working, the first thing you should do is make sure it’s clean, especially the charging contacts, and that it’s correctly situated in the charging case. A minor blockage or putting things in the wrong location can stop charging or recognition.

Connection Fails Over and Over: If the connection procedure keeps failing, try pairing your AirPods Pro with a different iPhone or iPad, if you have one. This can assist you figure out whether the problem is with the AirPods or your main device. You may also try resetting your device’s network settings (Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings) to fix difficulties with connectivity that are already there.

The case doesn’t recognize the AirPods: Make sure that the new AirPod Pro you get is real and works with your current AirPods Pro model. Fake or incompatible AirPods might never connect properly.

Why it matters to have professional repair and diagnostics

The procedures above can fix a lot of pairing problems, but there are times when you need to call in a specialist. AirPods Pro are complicated devices, and problems with the hardware can make it impossible to pair them, even with a real replacement.

Technicians who work in the field can:

Check to see whether your AirPods are real and work with your case: They can tell you for sure if your new AirPod is real and works with your case and other AirPods.

Fix problems with the internal Bluetooth chip: The problem might not be with the AirPod itself, but with the Bluetooth chip in the charging case or one of the AirPods. This may need special repair.

Find and replace broken charging cases: A broken charging case can stop pairing and charging from working properly. Experts can figure out if the case is the problem and suggest getting a new one if needed.

Talk about the risks of using replacement AirPods from other companies: Using fake or unverified third-party replacement AirPods might cause problems with pairing, worse audio quality, and even damage to your current AirPod or case. Professionals can find these problems and help you find good ways to fix them.

Why should you choose Mr Fix to fix your AirPods?

We at Mr Fix are experts in fixing your AirPods Pro so they work like new again. When your own attempts at fixing it don’t work, our knowledge is the answer.

Expert specialists: Our staff is made up of highly skilled and experienced specialists who can fix even the most difficult AirPods Pro pairing and hardware problems. We keep up with the newest ways to diagnose and fix Apple products.

Advanced Diagnostics: We employ professional-grade diagnostic tools to find out exactly what’s wrong with your AirPods Pro. This makes sure that we don’t just guess; we conduct repairs that are exact and work, bringing everything back to normal.

Fair and open pricing: We believe in fair and open pricing. There are no hidden fees with our pairing help or AirPods repairs; you’ll know exactly how much they will cost. We work hard to make good service available.

Quick Service: We know that you need your AirPods. That’s why we want to be as efficient as possible. For most typical AirPods problems, we offer same-day or next-day fixes to keep your downtime to a minimum.

We guarantee the quality of our work with a warranty on repairs. We offer a full warranty on all of our repairs and replacement parts, so you can be sure that you can trust us. We want you to be happy.

In conclusion

You can successfully link a new AirPod Pro with your current case if you know how to do so and follow the right steps. Many people can fix these problems on their own, but remember that professional help is always useful when your own efforts don’t work.

For all of your AirPods repair and pairing needs, you can trust Mr Fix. We promise to use our knowledge, cutting-edge diagnostics, and dedication to customer satisfaction to make sure you have a smooth and uninterrupted audio experience. Don’t let a lost or unpaired AirPod Pro ruin your day. We can help you get back to enjoying your music, podcasts, and calls with clear sound.

Should you find that despite diligently following all recommended troubleshooting steps, your AirPods Pro stubbornly refuses to connect or exhibit persistent pairing difficulties, we urge you to contact Mr Fix without delay. Our team of highly skilled technicians is prepared to offer a professional diagnosis and execute a swift, dependable repair, ensuring your audio world is restored to perfect harmony.

Have you followed all the steps, but your AirPods Pro still won’t connect? Contact Mr Fix immediately for a skilled diagnosis and a quick, dependable fix.